Taicang Kanghui Technology Development Co., Ltd.

Guizhuang Industry Park, Shaxi Town, 215425 Taicang
Telephone +86 512 53295857
Fax +86 512 53293838

Hall map

REHACARE 2018 hall map (Hall 5): stand H09

Fairground map

REHACARE 2018 fairground map: Hall 5

Our range of products

Product categories

  • 03  Barrier free living
  • 03.02  Area of living and sleeping room
  • 03.02.01  Riser chairs and standing up hoists

Riser chairs and standing up hoists

  • 03  Barrier free living
  • 03.03  Area of kitchen, bath and toilet
  • 03.03.01  Riser aids for toilet and shower

Riser aids for toilet and shower

  • 09  Nursing care for in-patient and homecare
  • 09.02  Transfer, turning and lifting aids for persons
  • 09.02.05  Stationary and movable hoists / lifter

Stationary and movable hoists / lifter

  • 09  Nursing care for in-patient and homecare
  • 09.02  Transfer, turning and lifting aids for persons
  • 09.02.06  Patient transfer systems
  • 09  Nursing care for in-patient and homecare
  • 09.03  Aids for care and hygiene
  • 09.03.07  Movable shower chairs

Movable shower chairs

Our products

Product category: Patient transfer systems

DH-C102B Multifunctional bed

Operation Description

●The obstetric table is designed and manufactured to meet the need of the market. It absorbs the advanced foreign technology. It is used for childbirth, gynecology surgical operation,examining and many other functions, including urgent caesarean operation.

●The ascent and descent, forward and backward tilting of this set are manipulated by micro touching controller and of usage convenience and agility. 

●The key part of the power system adopts imported motor, Denmark's LINAK, which is safe and stable. 

● The back section adopts gas springs structure, and the angle can be adjustable. 

● The assist platform is controlled by hand and can be concealed, making the operation convenient.

●The whole surface of  bed adopts imported(PU) leather, one-time molding (seamless, wrapping).

● The planks, basins and all outer shells are made of stainless steel, which makes nice appearance and easy cleaning.

Technical  Parameters

Table top dimension: length 1900mm, width 610mm

Min.& Max. table height: 750mm~1000mm

Trendelenburg & reverse trendelenburg:reverse trend ≥ 15°, trend  ≥15°

Back section turning: 0~75°

Assist platform dimension: length 550mm, width 550mm

Arm rest swing out: ≥ 90°

Footrest swing out: 0~45°

Footrest turn up: 0~45°

Filth basin dimension:468×338×125mm(can be equipped with soft pipe)

Power: AC 220V 50HZ

More Less

Product category: Patient transfer systems

DH-C101B01 Fully automatic luxury LDR bed

Operation Description

TheDH-C101B01 is a new product which is designed and manufactured under the instruction of human engineering. It can be automatically changed from a common bed to an obstetric table, and it has an electronic induction balance and a CD stereo as well.

● The main parts of the table adopt imported brands of high quality.It is the most modern obstetric table in China for its good design and advanced technology. It has the characteristics of convenient operation of automatically changing the bed to the obstetrictable. The stock of the ankle can be adjusted according to the puerperants and the proceeding of parturition.

●The angle of the back board and ankle partcan be adjusted as well, for all kinds of postures, like back-lying, sitting,side-lying, squatting, face-down lying and so on.

●The frame, back,seat ,and leg scetion  can be adjusted by electric hydraulic system through foot switch or hand control.

●The base is plastic and column cover, the middle frame is powder coating.

●Mattress is madefrom mould, with no seam on the surface, which is easy to clean.

●With the various functions, the pattern canbe one of the best choices for hospitals.

Technical Parameters

Bed dimension:Length 2000mm  Width 920mm

Assist platform dimension:Length 500mm   Width 540mm

Assist platform lifting distance: 110mm

Bed height:min. ≤590mm,max. ≥1000mm

Back section turning:down≥5°,up≥65°

Seat section turning:≥20°

Leg section swing out: ≥30

Leg section adjusting:≥20°

Leg section sliding:60mm

Footrest folding:≥35°

Guard rail turn over: 180°

Standard Accessories

Sliding platform for newborn baby    1set

Enclosure                        1pair

Seat cover                        1set

Pillow(low elasticity)               1piece

Stainless steel basin                 1set

Pedal swicth                      1piece

Soft bed cushion                   1 siut

Electronic balance

More Less

Product category: Patient transfer systems

DH-S103 Electric operating table (electric hydraulic)

Operation Description

The main hydraulic pressure system is imported from Japan, safe and dependable. 

Superior stainless steel housing for the base set and support system ofthe table make cleaning with a clearcut. All mattresses are cast and made from polyurethane, easy to clean.

The surfaces of the table are made of  Plexiglas, by putting the X-rayfilm container between upper and bottom deck of the table. Radiographic examination can be carried out without moving the patient.

The back section of the table is movable, on which an elevator can befit for the operation on kidney and gall ladder. All the clamps for fixing the accessories are detachable and easy to use.

The surgical operation contains two controllers, fixed type and trailing type, operating conveniently.

Technical Parameters

Tabledimension including the rails: length 2010mm,width 540mm

Tabletop dimension: length 1985mm,width 500mm

Tableheight: lowest≤780mm, highest≥1030mm

Slidingdistance: 300mm

Lateraltilt: left≥19°right≥19°

Trendelenburgand reverse trendelenburg: reverse trend≥20°trend≥18°

Head sectionturning: up≥15°°down≥90°

Backsection turning: up≥80°down≥10°

Legsection turning down: ≥90°

Legsection swing out: ≥90°

Armrestswing out: ≥90°

Kidneybridge lifting distance: 150mm

Standard Accessories

Anaesthesiascreen frame     1 set

Bodystrap                 1piece

Lateralsupport             1 pair

Shouldholder              1 pair

Legholder                 1 pair

Clamp                    1 set

Armrest                   1 pair

Hand control                1 piece

More Less

About us

Company details

The company is located in the south of Yangtze River, adjacent to Shanghai, relying on the Yangtze River port, close to the Yangtze River Highway, the geographical position is superior, convenient transportation, is a professional production and sales of one or two types of medical equipment series products.
  Company was founded in April 1998, the registered capital of 12000000 yuan, the company is a private high-tech enterprises, plant covers an area of more than 36000 square meters. GB/T19001 - 2000 ISO9001:2000 IDT, 2003idt ISO13485:2003 YY/T0287, FDA and CE in the United States are the first in the industry to take the lead in the industry.
  After many years of hard work and continuous scientific and technological development, the company has formed a series of Obstetrics and Gynecology, and other medical equipment, supplemented by the production and operation system. The main products of the LDR multifunctional production (fcmf family of the delivery room equipment) beds, multifunctional obstetric table, gynecological surgery Taiwan, electric hydraulic operation and Taiwan, blood collection chair series. Product technology content is high, the design is exquisite. In the domestic and foreign similar products in a leading position, has been gradually applied to the State Patent Office and obtain more than 150 patents, including 60 invention patents.
  Companies focus on the development and construction of domestic and international markets, flexible market operation mechanism, quality of service, the company's marketing and service network continues to grow and improve, the company operates a comprehensive operation track, in the industry has a high visibility.
  Facing the challenges and opportunities in twenty-first Century, we will continue to explore and innovate, and to develop and optimize the medical device series products, and to enhance the competitiveness of enterprises, and to meet the needs of the market and consumers. 

More Less